Skip to content
Mondraker - Crafty RR - 2022

Mondraker - Crafty RR

SKU MOCRAFTYRR22S
Save 17% Save 17%
$14,500.00
$14,500.00 - $14,500.00
$14,500.00
$11,999.00
$11,999.00 - $11,999.00
$11,999.00
Size: S

Full metal, full Factory, full throttle’ is the riot-ready reasoning behind the Mondraker Crafty RR.

Our 6061-aluminum Stealth Alloy Evo frame is bomber tough and loaded with sweet detailing like integrated dropout speed sensor and MAX capacity sealed bearings but it’s still lighter than many of the carbon frames out there. Fox 38 Float fork and DPX2 shock are top spec, Kashima coated Factory units for unmatched control in the craziest moments. Super powerful 85Nm Bosch Performance Line Gen 4 motor and Powertube 750Wh battery are seamlessly integrated and ready to turn every trail into a downhill again and again. Forward Geometry handling and e-bike tuned Zero Suspension are the skill-expanding and thrill-bringing gifts that keep on giving on every run too.

Frame Crafty 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150mm travel, Forward Geometry, internal non-removable battery, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17mm axles, integrated dropout speed sensor, exclusive plastic motor covers.
Sizes S: 380mm / M: 420mm / L: 450mm / XL: 490mm
Rear shock Fox Float-X LV Factory Kashima, 205x65mm. Settings: compression 3 positions lever, low-speed compression, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
Shock settings CEC001 compression, Medium rebound, 0,2 volume spacer
Fork Fox 38 29 Float GRIP2 Factory Kashima, 160mm, e-bike tuned, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: 3 position with micro adjust compresion, low-speed rebound, air preload
Headset Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
Stem Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore
Handlebar Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore
Grips Onoff Diamond, 1lock-on, 135mm
Seatpost Fox Transfer Factory Kashima internal, diameter 31.6mm, S size: 363.5x125mm, M size: 418.3x150mm, L/XL size: 475.1x175mm
Saddle FIZIK Terra Aidon X5 145mm
Front brake Sram Code R, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
Rear brake Sram Code R, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
Brake lever Sram Code R, tool-free reach adjust
Rims Mavic E-Deemax 29, 30mm internal width, welded, PFP, tubeless ready, 28 spokes
Spokes Mavic J-bend duble butted, contactless lacing
Front hub Mavic, Boost 15x110mm, IS 6 bolts
Rear hub Mavic, Boost 12x148mm, ID360 Ratched system, IS 6 bolts
Front tire Maxxis Minion DHF 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead
Rear tire Maxxis Minion DHR II 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead
Crankset Race Face Aeffect ebike, 165mm
Rings Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
Chain Sram NX Eagle, 12s, Powerlock
Rear derrailleur Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
Shift levers Sram Trigger GX Eagle, 12s, X-Actuation 1:1, single click
Casette Sram XG-1230, 11-50T, 12s
Derailleur hanger Mondraker M068
Weight 24.9 kg
Display Bosch Kiox 300
Motor Bosch Performance Line CX Cruise (25Km/h) GEN4 BS3
Battery Bosch Powertube 750Wh

* Specifications are subject to change without notice

All bikes purchased from iRIDE will have been pre-assembled by our mechanics and test ridden. You will also receive a multi point checklist of all the safety checks and bike build elements we work through to ensure you bike is correctly assembled, and then tested so that it runs as it should. Bikes being sent to a customer who is unable to collect it from iRIDE, will have it boxed, wheels, saddle and bars generally off and re-packaged.

The delivery of bikes will be organized once a freight fee can be determined based on weight and delivery location.

Assembly should take no longer than 10-20 minutes. It is recommended that a skilled mechanic assemble, or check the bike. If possible your local bike shop is likely best placed to do this from a safety perspective to ensure all is as it should be. If a rider is having any issues we can hook up an online video chat, or talk over the phone. If this service is required email us at workshop@iride.net.nz to organise a time that suits all parties.

  • DESCRIPTION
  • FEATURES
  • SPECIFICATION
  • GEOMETRY
  • BUYING A BIKE

  • Full metal, full Factory, full throttle’ is the riot-ready reasoning behind the Mondraker Crafty RR.

    Our 6061-aluminum Stealth Alloy Evo frame is bomber tough and loaded with sweet detailing like integrated dropout speed sensor and MAX capacity sealed bearings but it’s still lighter than many of the carbon frames out there. Fox 38 Float fork and DPX2 shock are top spec, Kashima coated Factory units for unmatched control in the craziest moments. Super powerful 85Nm Bosch Performance Line Gen 4 motor and Powertube 750Wh battery are seamlessly integrated and ready to turn every trail into a downhill again and again. Forward Geometry handling and e-bike tuned Zero Suspension are the skill-expanding and thrill-bringing gifts that keep on giving on every run too.

  • Frame Crafty 6061 Alloy Stealth Evo, e-Bike Optimized Zero Suspension System, 150mm travel, Forward Geometry, internal non-removable battery, Boost 12x148mm rear axle, tapered head tube, one-piece Monoblock upper link, HHG internal cable routing, MAX capacity sealed bearings, oversize 17mm axles, integrated dropout speed sensor, exclusive plastic motor covers.
    Sizes S: 380mm / M: 420mm / L: 450mm / XL: 490mm
    Rear shock Fox Float-X LV Factory Kashima, 205x65mm. Settings: compression 3 positions lever, low-speed compression, low-speed rebound, air preload. Trunnion top mount, 25x10mm bottom bushings
    Shock settings CEC001 compression, Medium rebound, 0,2 volume spacer
    Fork Fox 38 29 Float GRIP2 Factory Kashima, 160mm, e-bike tuned, tapered steerer tube, Boost 15x110mm axle, offset 44mm. Settings: 3 position with micro adjust compresion, low-speed rebound, air preload
    Headset Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
    Stem Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore
    Handlebar Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 800mm, 9º backsweep, 5º upsweep, 31.8mm barbore
    Grips Onoff Diamond, 1lock-on, 135mm
    Seatpost Fox Transfer Factory Kashima internal, diameter 31.6mm, S size: 363.5x125mm, M size: 418.3x150mm, L/XL size: 475.1x175mm
    Saddle FIZIK Terra Aidon X5 145mm
    Front brake Sram Code R, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
    Rear brake Sram Code R, oversized 4-piston caliper, Centerline 200mm IS 6 bolts one-piece rotor, steel-backed metal sintered pads
    Brake lever Sram Code R, tool-free reach adjust
    Rims Mavic E-Deemax 29, 30mm internal width, welded, PFP, tubeless ready, 28 spokes
    Spokes Mavic J-bend duble butted, contactless lacing
    Front hub Mavic, Boost 15x110mm, IS 6 bolts
    Rear hub Mavic, Boost 12x148mm, ID360 Ratched system, IS 6 bolts
    Front tire Maxxis Minion DHF 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead
    Rear tire Maxxis Minion DHR II 29x2.6, tubeless ready, 3C MAXX TERRA, EXO+ Protection, 120TPI, folding bead
    Crankset Race Face Aeffect ebike, 165mm
    Rings Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
    Chain Sram NX Eagle, 12s, Powerlock
    Rear derrailleur Sram GX Eagle, Type 3 roller bearing clutch, cage lock, 1x12s, X-Actuation 1:1
    Shift levers Sram Trigger GX Eagle, 12s, X-Actuation 1:1, single click
    Casette Sram XG-1230, 11-50T, 12s
    Derailleur hanger Mondraker M068
    Weight 24.9 kg
    Display Bosch Kiox 300
    Motor Bosch Performance Line CX Cruise (25Km/h) GEN4 BS3
    Battery Bosch Powertube 750Wh

    * Specifications are subject to change without notice

  • All bikes purchased from iRIDE will have been pre-assembled by our mechanics and test ridden. You will also receive a multi point checklist of all the safety checks and bike build elements we work through to ensure you bike is correctly assembled, and then tested so that it runs as it should. Bikes being sent to a customer who is unable to collect it from iRIDE, will have it boxed, wheels, saddle and bars generally off and re-packaged.

    The delivery of bikes will be organized once a freight fee can be determined based on weight and delivery location.

    Assembly should take no longer than 10-20 minutes. It is recommended that a skilled mechanic assemble, or check the bike. If possible your local bike shop is likely best placed to do this from a safety perspective to ensure all is as it should be. If a rider is having any issues we can hook up an online video chat, or talk over the phone. If this service is required email us at workshop@iride.net.nz to organise a time that suits all parties.

Mondraker Enduro AM Promo