Peaty's - Tubeless Valves MK1 42MM
loading..
With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways your bike is in for a real treat for years to come!
Made from lightweight anodised 7075 aluminium, Peaty’s tubeless valves are available in 42mm and 60mm lengths and fit most tubeless rims including carbon, Enduro and DH rims.
The large soft rubber base easily creates an airtight seal on valve holes up to 8mm diameter. The integrated valve core remover caps make removing the valve and topping up with sealant a breeze when in the workshop or on the trails.
VALVES FOR LIFE!
If you manage to break, snap, bend or crack our valves* then we'll fix or replace them free of charge!
FITTING INSTRUCTIONS:
- Remove valve cap, o-ring and lock nut
- Insert valve through valve hole in rim
- Push the o-ring onto valve stem
- Thread the lock nut onto valve stem
- Hand tighten lock nut until firm
- Screw on valve cap
VALVE CORE REMOVAL:
To de-core the valve, all you need to do is:
- Unscrew the valve cap
- Slot the valve cap over the valve core
- Twist anticlockwise until the core can be pulled out
- Repeat in reverse to refit