Skip to content

Mondraker - Thundra - 2021

$6,199.00
SKU

Interested in this bike? Please email us or use the ENQUIRY FORM below to check your size and availability.

Fields with * are required

  • DESCRIPTION
  • SPECS
  • GEOMETRY
  • SIZE
  • BUYING A BIKE
  • Access a whole new world of adventure with our electrically-assisted trail bike, Thundra.

    It uses a specific version of our fully butted, XC race influenced Xtralite alloy frame housing an internal battery that provides 630Wh of range to the proven E7000 STEPS motor (you can add even more range with a frame mounted 360Wh extender cell!) Big rotor Shimano brakes and SRAM SX Eagle 12-speed drivetrain give super reliable stop and go control. RockShox Recon 120mm air sprung fork and either 29 x 2.6in or 27.5 x 2.8 Maxxis Rekon rubber flow and float you over the roughest trails. And of course it wouldn’t be a Mondraker if it didn’t have our power dialled Forward Geometry to make every meter the most fun possible.

    Mondraker Trail 2021 Promo
  • Frame Thundra 6061 Xtralite Full Butted Alloy, Forward Geometry, integrated internal non-removable battery, tapered head tube, Boost 12x148mm rear axle, integrated dropout speed sensor.*Optional external battery
    Sizes XS: 380mm / S: 390mm / M: 430mm / L: 470mm / XL: 510mm
    Fork RockShox Recon Silver RL 29, 120mm, Motion control, Solo Air, tapered steerer tube, Boost 15x110mm axle, 42mm offset. Settings: compression adjustment at low-speed to lock, rebound, air preload
    Headset Onoff Saturn tapered for 1-1/8” to 1-1/2” head tube, ACB sealed bearings, top 41x30.2x7x45ºx45º, bottom 51.9x40x8x45ºx45º
    Stem Onoff Sulfur FG 30mm 0º, 6061 forged alloy, 31.8mm barbore
    Handlebar Onoff Sulfur 1.0 double butted 6061 alloy, rise: 20mm, width: 780mm, 9º backsweep, 5º upsweep, 31.8mm barbore
    Grips Onoff Twin, 1lock-on, 135mm
    Seatpost Onoff Sulfur 0-R, 6061 T6 Alloy, 3D forged, diameter 31.6mm, length 400mm
    Saddle Mondraker e-MTB custom design
    Front brake Shimano MT201, RT66 203mm IS 6 bolts rotor, resin pads / Sram Level T, 2 piece caliper, Centerline 200mm IS
    Rear brake Shimano MT201, RT66 180mm IS 6 bolts rotor, resin pads / Sram Level T, 2 piece caliper, Centerline 200mm IS
    Brake lever Shimano MT201, tooled reach adjust / Sram Level T, Direct Link actuation, tooled reach adjust, lever pivot bushings
    Rims MDK-HP1 29, 30mm internal width, tubeless ready, 32 spokes
    Spokes CN round stainless steel
    Front hub Formula DC711, Boost 15x110mm, sealed bearings, IS 6 bolts
    Rear hub Formula EHL148 Boost 12x148mm, sealed bearings, IS 6 bolts
    Front tire Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
    Rear tire Maxxis Rekon 29x2.6, tubeless ready, dual compound, EXO protection, 60TPI, folding bead
    Crankset Shimano STEPS E8000, 165mm / FSA, 165mm
    Rings Sram X-Sync 2 Eagle 34T, steel, narrow-wide, 104 BCD
    Chain Sram SX Eagle, 12s, Powerlock
    Rear derrailleur Sram SX Eagle, Type 3 roller bearing clutch, cage lock, long cage, 1x12s, X-actuation 1:1
    Shift levers Sram Trigger SX Eagle, 12s, X-Actuation 1:1, single click
    Casette Sram PG-1210, 11-50T, 12s
    Derailleur hanger Mondraker M068
    Others /
    Weight 22
    Motor Shimano E7000 Steps Motor
    Battery *Optional external battery: Simplo 360Wh

    • Mondraker Thundra 2021 Geometry
    • Mondraker Thundra 2021 Geometry Graph
  • This size table is only an estimation, the optimum frame size depends on your personal preference and riding style.

    Mondraker-Bike-Size-Guide
  • All bikes purchased from iRIDE will have been pre-assembled by our mechanics and test ridden. You will also receive a multi point checklist of all the safety checks and bike build elements we work through to ensure you bike is correctly assembled, and then tested so that it runs as it should. Bikes being sent to a customer who is unable to collect it from iRIDE, will have it boxed, wheels, saddle and bars generally off and re-packaged.

    The delivery of bikes will be organized once a freight fee can be determined based on weight and delivery location.

    Assembly should take no longer than 10-20 minutes. It is recommended that a skilled mechanic assemble, or check the bike. If possible your local bike shop is likely best placed to do this from a safety perspective to ensure all is as it should be. If a rider is having any issues we can hook up an online video chat, or talk over the phone. If this service is required email us at workshop@iride.net.nz to organise a time that suits all parties.