Specialized - Stumpjumper EVO Comp - 2022
Interested in this bike? Please email us or use the ENQUIRY FORM below to check your size and availability.
- GEOMETRY & SIZING
- BUYING A BIKE
In order to bring EVO fun to the masses, we took our FACT 11m carbon frame (yes, the same one as the S-Works), dressed it with a bullet-proof SRAM GX Eagle 12-speed drivetrain and a tough as nails set of alloy wheels, and set it loose to shred unsuspecting trails everywhere.
- All the travel in the world is useless without the proper shock tuning and kinematics. For the new Stumpjumper EVO design, we prioritized kinematic performance. Applying lessons learned while developing the Enduro, then following that with more than 1,000 hours of field and suspension lab development, we’ve not only improved the pedaling performance of the Stumpjumper, but we’ve made it more capable, agile, and lively. We increased anti-squat, so the suspension better resists pedal bob, and we further improved bump performance on square-edge hits. Bottom line? This thing shreds trails, not legs.
- The S-Sizing geometry of the new Stumpjumper EVO is our most progressive yet. Long, low, slack, short offset fork, steeper seat tube angle – these are requirements for modern progressive riding. But not everyone jibs the same way, which is why the geo on the new Stumpjumper EVO is fully adjustable with six different settings. You can adjust the BB height by 10mm, you can adjust your head angle by two-degrees, and you can make these adjustments independently of each other. Finally, if you want to go full-party mullet-mode, the EVO lets you run a 27.5-inch rear wheel mated with a 29-inch front.
- Rider-First Engineered™ frames use a size-specific approach to ride characteristics that ensures benchmark handling and flawless performance, regardless of frame or rider size. Whether you’re a jump-happy grom riding an S1, or a DH-fiend giant in need of the lengthy S6, you’ll experience the same ride traits – rail-sharp cornering and balanced front and rear stiffness – at the lightest-possible weight.
- We introduced the SWAT™ door on the Stumpjumper in 2016, adding room IN your frame for those “oh sh**t” necessities like pumps and spare tubes, and immediately rendering jersey pockets redundant. With the new Stumpjumper, we have increased the volume and added a SWAT™ Bladder, giving you an extra 22oz of water storage – the same size as a small water bottle – hidden in your downtube.
FRAMESET Frame FACT 11m carbon chassis and rear-end, asymmetrical design, 29 Trail Geometry, SWAT™ Door integration, head tube angle adjustment, threaded BB, fully enclosed internal cable routing, 12x148mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, 150mm of travel SWAT Increased-volume SWAT™ Door integration with 22oz SWAT™ Bladder Seat Binder Alloy, 38.6mm SUSPENSION Rear Shock FOX FLOAT X Performance, Rx Trail Tune, EVOL Air sleeve, 2-position lever w/ LSR adjustment, S1:210x50mm, S2-S6:210x55mm Fork FOX FLOAT 36 Rhythm, GRIP damper, two position Sweep adjustment, 15x110mm QR axle, 44mm offset, S1:150mm of travel, S2-S6:160mm of travel COCKPIT Stem Alloy Trail Stem, 35mm bar bore Handlebars Specialized, 6061 alloy, 6-degree upsweep, 8-degree backsweep, 30mm rise, 800mm width Tape Specialized Trail Grips Saddle Bridge Comp, Hollow Cr-mo rails, 155/143mm SeatPost X-Fusion Manic, infinite adjustable, two-bolt head, bottom mount cable routing, remote SLR LE lever, 34.9, S1: 100mm, S2: 125mm, S3: 150mm, S4/S5: 175mm, S6: 190mm BRAKES Front Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm Rear Brake SRAM Code RS, 4-piston caliper, hydraulic disc, 200mm DRIVETRAIN Rear Derailleur SRAM GX Eagle, 12-speed Shift Levers SRAM GX Eagle Trigger, 12-speed Cassette SRAM XG-1275, 12-speed, 10-52t Chain SRAM NX Eagle, 12-speed Crankset SRAM X1 6K, DUB, S1:165mm, S2-S5: 170mm, S6: 175mm Chainrings Alloy, 30T Bottom Bracket SRAM DUB, BSA 73mm, threaded WHEELS Rims Specialized 29, hookless alloy, 30mm inner width, tubeless ready Front Hub Alloy, sealed cartridge bearings, 15x110mm thru-axle, 28h Rear Hub Alloy, sealed cartridge bearings, 148mmx12mm thru-axle, 28h Spokes DT Swiss Industry Front Tire Butcher, GRID TRAIL casing, GRIPTON® T9 compound, 2Bliss Ready, 29x2.3" Rear Tire Eliminator, GRID TRAIL casing, GRIPTON® T7 compound, 29x2.3" Inner Tubes Standard, Presta valve
* Specifications are subject to change without notice
All bikes purchased from iRIDE will have been pre-assembled by our mechanics and test ridden. You will also receive a multi point checklist of all the safety checks and bike build elements we work through to ensure your bike is correctly assembled, and then tested so that it runs as it should. Bikes being sent to a customer who is unable to collect it from iRIDE, will be boxed, with wheels, saddle, and bars generally off and re-packaged.
The delivery of bikes will be organized once a freight fee can be determined based on weight and delivery location.
Assembly should take no longer than 10-20 minutes. It is recommended that a skilled mechanic assemble or check the bike. If possible your local bike shop is likely the best place to do this from a safety perspective to ensure all is as it should be. If a rider is having any issues we can hook up an online video chat, or talk over the phone. If this service is required email us at email@example.com to organise a time that suits all parties.